Skip to content

You Must Know When To Choose Screws Or Nails For Your Work

When and where is the right time to use nails or screws? Both types of binder have functions that are almost the same as their respective advantages in the process of making wood furniture or industrial machines. Practically most of us already understand and can quickly determine nails or screws. It is better to now clearly describe these reasons. Additionally, if your workers or machines damaged your ball screws, perhaps you can fix them by hiring the best www.superiorballscrewrepair.com/ company near your area.

Screws

The shape of the screw on the trunk serves to form a stronger bond on the wood. For best results, the wood must be perforated to the size of the core diameter of the screw and additional wood perforated to the size of the diameter of the outer screw.

With the screw, the screw application takes longer than the nail. what must be considered in the screw application is the screw head screw hole. The head of the sect must remain intact and good so that it can be used when opening or closing the screw again.

Nails

There are only strokes on the neck of the nail and the cross-section of the nail head. Scratches on the head of the nail function so that the hammer does not slip when inserting nails and strokes on the neck of the nail function to increase the binding power of nails into the wood after the entire body of the nail is set.

Application of nails is much faster than screws with lower binding power. And with hand aids now, in seconds we can immerse several nails at once. No pre-drilling holes are needed because nails are easier to immerse.

For the type of work that requires speed and the work, there will be no change, then the nail is the most appropriate binding device. Or as a temporary binder, the nails work very well and practically.

If you need a construction that requires better bonding power, the screw is a better choice than nails with longer consequences. The neatness of the work can be said to be the same because if you see from the hole produced the nail is actually smaller and easier to cover with filler wood.

Leave a Reply

Your email address will not be published. Required fields are marked *